Setting Alarm Clock - Geemarc DALLAS20 Mode D'emploi

telecommunication service provider. If you happen to press the wrong
key while entering the aforementioned codes, you can press on the
delete key
confirm each code once they have been entered. Setting an
automatic IP number allows your telephone to automatically dial said
number for you, providing that the phone number you have dialed
starts with "0".
After setting the automatic IP opening and the corresponding
automatic IP number in the menu, when picking up the phone for
manual dialing or pre-dial dialing, or for incoming and outgoing calls,
if the first number is "0", the phone will automatically add the
number before the number. Set the IP number.

SETTING ALARM CLOCK

When in the setting menu, go to the "SET 5 ALERT" sub-menu and
press the key.
The display reads "00-00 OFF". Use the arrow keys
to set the time for the alarm, selecting each digits for the hour and
minutes individually and pressing on the
To activate the alarm, use the arrow keys
"OFF" to "ON" and press the
If the alarm function is set ON, it will sound for 1 minute on time.
Press any key including
one second and then go off-hook to stop the alarm and return to the
on-hook state.
If the phone is off-hook, ringing, or missed (within 6 seconds after
the ringing stops) when the scheduled alarm time is reached, the
PHONE'S SETTING
to erase an incorrect digit. Press the
key, lift the hook switch to hang up for
key to confirm each one.
key to confirm.
10
key to
and
and to change