Dialling Types And Grounding (Uk Version); Time Break Recall Switch - Geemarc CL1100 Mode D'emploi

3 - DIALLING TYPES AND GROUNDING
A switch ETR/PR/T located on the upper side is equipped on some
models. If you wish to connect your CL1100 to a public UK/French
switch-board (PBX), move switch ETR/PR/T to position 3 (T). This
will ensure optimal compatibility of your phone with most (99%)
PBX.
Positions:
Position 1:
Pulse dialling. The R is grounded. This option can be used only
within the UK in very special cases.
Position 2:
Pulse dialling. The R is set according to the determined adjustment
(see «Time Break Recall Setting for R Function» p.5).
Position 3:
Tone dialling. The R is set according to the determined adjustment
(see «Time Break Recall Setting for R Function» p.5).
If you are using your CL1100 with a hearing aid, set your
hearing aid to "T" position.

4 -TIME BREAK RECALL SWITCH (300/100)

Check the Time Break Recall setting of your CL1100. For the UK
the Time Break Recall should be set to 100 mS. It can be switched
to 300 mS for other locations or PBX's.
SETTING UP
SETTING UP
6