Blackmagic Design HyperDeck Studio HD Pro Manuel D'installation Et D'utilisation page 56

Enregistreurs à disque
Table des Matières

Publicité

Command
configuration: timecode input:
{external/embedded/preset/clip}
configuration: timecode output:
{clip/timeline/internal}
configuration: timecode preference:
{default/dropframe/nondropframe}
configuration: timecode preset:
{timecode}
configuration: audio input channels: {n}
configuration: record trigger:
{none/recordbit/timecoderun}
configuration: record prefix: {name}
configuration: append timestamp:
{true/false}
configuration: xlr input id: {n} xlr type:
{line/mic}
configuration: genlock input resync:
{true/false}
uptime
format: prepare: {format}
format: confirm: {token}
identify: enable: {true/false}
watchdog: period: {period in seconds}
reboot
slate clips
slate project
slate project:↵
camera: {index}↵
Command Combinations
You can combine the parameters into a single command, for example:
play: speed: 200 loop: true single clip: true
Or for configuration:
configuration: video input: SDI audio input: XLR
Or to switch to the second disk, but only play NTSC clips:
slot select: slot id: 2 video format: NTSC
Using XML
While you can use the Terminal to talk to HyperDeck, if you are writing software, you can use XML
to confirm the existence of a specific command based on the firmware of the HyperDeck you are
communicating with. This helps your software user interface adjust to the capabilities of the specific
HyperDeck model and software version.
Command Description
change the timecode input
change the timecode output
whether or not to use drop frame timecodes when not
otherwise specified
set the timecode preset
set the number of audio channels recorded to {n}
change the record trigger
set the record prefix name (supports UTF-8 name)
append timestamp to recorded filename
configure xlr input type
multiple xlr inputs can be configured in a single command
enable or disable genlock input resync
return time since last boot
prepare a disk formatting operation to filesystem {format}
perform a pre-prepared formatting operation using token
identify the device
client connection timeout
reboot device
slate clips information
slate project information
set camera index e.g. A
Information pour les développeurs
199

Publicité

Table des Matières
loading

Table des Matières