Publicité
Pre-operation Checklist
Check that the backhoe is properly attached to
the power unit. Be sure retainers are used on the
mounting pins and mounting hardware is tightened
to their specifi ed torque.
Check that hoses and pivot points are free of any
debris or entangled material.
Check the machine has been lubricated following
the schedule outlined in the Maintenance section.
Check that all boom assembly pivot points move
freely.
Check that stabilizers move freely.
Check that hydraulic hoses are not rubbing
anywhere, pinched or crimped.
Check for hydraulic leaks. Tighten connections or
replace components to stop leaks.
Check and ensure that all covers, guards and
shields are in place, secured, and can function as
designed.
Check and tighten all fasteners. Make sure the
equipment is in good condition.
Check that appropriate equipment for personal
protection is available and being used.
Check that jewelry, loose-fi tting clothing are not
worn. Make sure long hair is tied back.
Publicité
