Illustration and explanation of pictograms
1
2
1 Wear eye, head and ear protection!
2 Warning!
3 Read operation instructions before use
4 Do not subject this electric power tool to rain
5 Remove plug immediately if the power flex is damaged or cut.
6 Attention, kick-back!
7 Hold tool with both hands!
8 Attention: Environmental Protection! This device may not be disposed of with general/ household waste. Dispose of
only at a designated collection point.
Intended use
This chain saw may only be used by one person to saw
wood. The chain saw must be held with the right hand
on the rear handle and the left hand on the front handle.
Before using the chain saw, the user must have read and
understood all information and instructions in the oper-
ating instructions. The user must wear appropriate per-
sonal protective equipment (PPE).
The chain saw is only permitted to be used to
cut wood. Materials such as plastic, stone, metal
or wood that contains foreign matter (such as nails
or screws) are not permitted to be cut.
General safety instructions
Noise emission information in accordance with the Ger-
man Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work
can exceed 80 dB(A). In such cases the operator will
require noise protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local
regulations when operating your device.
General safety information for power tools
Warning! Read all safety-related information
and safety instructions! Failure to observe the
safety information and instructions may result in
electric shock, burns and/or severe injury.
Keep the safety information and instructions for
future reference.
The term 'power tool' as used in the safety information
and instructions includes both mains-operated tools
(with power cord) and battery-operated tools (without
power cord).
1) Safety at the workplace
a) Keep your working area clean, tidy and well-lit.
Disorder and poorly lit working areas may result in
accidents.
GB | Operating Instruction
3
4
b) Do not operate the power tool in potentially
c) Keep children and other persons away while you
2) Electrical safety
a) The mains plug of the power tool must fit into the
b) Avoid physical contact with earthed surfaces as
c) Keep the tool out of the rain or moisture in
d) Do not use the cord to carry or hang up the tool
e) When operating a power tool outdoors, use ex-
f) If the operation of a power tool in a moist envi-
3) Personal safety
a) Always pay attention to what you do and apply
GB-3
5
6
explosive environments containing combustible
fluids, gases or dusts. Power tools generate sparks
that may ignite dusts or fumes.
are operating the power tool. Distractions may
result in the operator loosing control over the tool.
mains socket. The plug must not be modified in
any way. Do not use adapter plugs/connectors in
combination with tools with protective earthing.
Unmodified plugs and fitting sockets reduce the risk
of electric shock.
pipes, heaters, ovens and refrigerators. There is
an increased risk of electric shock if your body is
earthed.
general. The penetration of water into a power tool
increases the risk of electric shock.
or to pull the plug out of the socket. Keep the
cord away from heat, oil and sharp edges or mov-
ing parts of the tool. Damaged or tangled cords
increase the risk of electric shock.
clusively extension cords that are approved for
outdoor-use. The use of an extension cord that is
suitable for outdoor use reduces the risk of electric
shock.
ronment cannot be avoided it is highly recom-
mended to use a residual current device (RCD).
The use of an RCD reduces the risk of electric shock.
reasonable care when working with a power tool.
Do not use the power tool when you are tired
or under the influence of medication, drugs or
alcohol. When working with power tools, even a
7
8