Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 INSTALLATION
01
Mount the sound decoupler around each height adjuster.
03
Loosen the control screws and place the caps on top of the screws.
You can find the control screws on the side of the device.
05
Fix the device to the floor, thanks to the height control in combina-
tion with the rubber sound decouplers.
Use the correct plug for your floor type.
JAGA NV | MINI CANAL ELECTRIC | MANUAL | 13 sEpTEMbER 2021, 10:38 | V.1
02
Fix the height adjusters to the casing. Do not completely tighten
the bolt.
04
min.20cm (7⁷/₈ inch)
Place the device in the correct position.
Curtains to the floor: Place the device at least 20 cm from the
window.
06
Use the control screws to adjust the unit to the desired height.
Secure the height.
Make sure that the top of the device is aligned with the
finished floor.
EN
7
Publicité
Table des Matières
