ID 250E
TECHNICAL INFORMATION
1.1 General Information
ID 250E is an inverter welding machine that works with 3-phase 400 VAC 50-60 Hz voltage, has a direct current
output, can be easily transported, and can burn MMA up to 5.0 mm. It provides excellent arc characteristics for
all rutile and basic covered electrodes. The machine is fan cooled and thermally protected against overheating.
1.2 Machine Components
1
2
3
4
5
6
2- Digital Display
1- Handle
3- Arc Force Pot
4- Hot Start Pot
5- Current Adjustment Pot
www.magmaweld.com
Figure 1 : ID 250E
7- Welding and Ground Cable Socket (+)
6- Welding and Ground Cable Socket (-)
8- On/Off Switch
9- Power Cable Inlet
USER MANUAL | MANUEL D'UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
8
7
Technical Information
11
9
EN