Chauvet DJ Hurricane 700 Mode D'emploi page 4

Hurricane™ 700 QRG EN
AC Power This product has a fixed voltage power supply and it can work with an input
voltage of either 120 VAC, 60 Hz or 230 VAC, 50 Hz, depending on the
specific model.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
1. Disconnect the product from power.
Fuse
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
Replacement
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting Before mounting this product, read the Safety Notes.
Safety Cable
Mounting Clamp
(works with CH-05 from
(such as CLP-15 or
Chauvet)
CLP-15N clamp from
Chauvet)
Mounting
Bracket
Bracket
Adjustment
Knobs (x 2)
Product
Mounting
Diagram
Rubber Feet (x 4)
For Floor Mounting
4