Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9.
ASSEMBLY INSTRUCTIONS
9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.
10. MOUNTING INSTRUCTIONS
Mounting the charger to the fender well: The charger
can be mounted directly to the fender well of your vehicle,
as shown. If using the nuts and bolts provided, drill two
holes between 3/16" and 1/4" in diameter. (For alignment
of holes use the charger as a template.) If the backside of
the mounting surface is hard to reach, you may consider
using two 1/2" long sheet metal screws (not included)
instead of the nuts and bolts provided.
Mounting the charger alongside the battery: The charger can also be mounted
alongside your vehicle's battery using the bracket provided. If possible, mount the
charger to the side of the battery away from the engine and
fan blades. Mount the bracket
to the charger as shown using
the nuts and bolts provided.
Loosen the battery retaining
hardware enough that you can
insert the bracket between the
bottom of the battery and the
battery mounting tray as shown. Position the charger so that it will not rub against
the battery or any other part of the vehicle, and then tighten the battery retaining
hardware. NOTE: Do not drill or puncture the battery.
Electrical Installation: The output leads of the charger are terminated with 3/8"
dia. ring lugs. Route and secure the AC cord and the output wiring away from the
gas line, carburetor or other hot, sharp, moving or pinch parts to avoid damage
to the insulation. Secure the AC cord using a cable tie or equivalent. If you have
difficulty connecting the output leads, consult your local auto supply store, they
may assist you in finding a connecting device for your application.
11. LED INDICATORS
RED LED (solid): The charger is charging the battery.
RED LED (flashing): The connections are reversed, or the charger is in abort mode.
GREEN LED (pulsing): The battery is fully charged and the charger is in
maintain mode.
• 9 •
Publicité
Table des Matières
Dépannage
