Assembly Instructions; Features; Control Panel - Schumacher Electric 715005061 Manuel D'utilisation

• Ensure that the extension cord is properly wired and in good electrical condition.
• Wire size must be large enough for the AC ampere rating of charger, as specified below:
Length of cord (feet)
AWG* size of cord
*AWG-American Wire Gauge
9.

ASSEMBLY INSTRUCTIONS

9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.

10. FEATURES

1

11. CONTROL PANEL

DIGITAL DISPLAY
The digital display indicates the status of the battery and charger. See the Display
Messages section for a complete list of messages.
NOTE: During charging, the display will go into sleep mode and will not display any
messages. To turn the display back on, press the display button.
DISPLAY/ON BUTTON
The digital display will show the battery's voltage and percentage of charge.
Press the display button to show the charge progress.
LED DISPLAY
GREEN LED solid (CHARGING): The charger is charging the battery.
GREEN LED pulsing (CHARGED/MAINTAINING): The battery is fully charged
and the charger is in maintain mode.
GREEN LED flashing: The charge has aborted (see Aborted Charge section).
25
18
4
3
2
7
8
50 100 150
18 16
1. AC Power cord
5
2. Digital display
3. Display/ON button
4. Charging/Charged/Maintaining
6
LED indicator
5. Hook attachment
6. 12V accessory plug
quick-connect
7. Battery clamp quick-connect
8. Ring terminal quick-connect
• 8 •
14
487802781