visocor HM40 Mode D'emploi page 51

Appendix
Error
Incorrect measured values
Measurements too high
Cuff is not being inflated
Cause
Arm or body movement during
measurement.
Wrist position too high or too low.
Cuff not sitting properly
Cuff not fitted properly
Cardiac arrhythmia during
measurement
5-10 minutes' relaxation not observed
before measurement
Batteries empty?
Remedy
Repeat measurement after 3-5 minutes. Do
not move your arm and do not talk.
Repeat measurement after 3-5 minutes, with
your wrist at heart level.
Check wrist circumference
Repeat measurement after 5 minutes
Repeat measurement after 5 minutes
Repeat measurement with at least 5 minutes'
relaxation before the next measurement
Check batteries and replace if necessary.
G
GB-51