Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. INSTALLATION
01
Remove the valve cover plate before installing the device.
03
Fix the height adjusters to the casing. Do not completely tighten
the bolt.
In case of continuous installation: continue to step 05.
In case of a single device installation: continue to step 07.
JAGA N.V. | CLIMA CANAL H19 | MANUEL | 2021.02.23 | V.01
02
Mount the sound decoupler around each height adjuster.
04
2
Unscrew the control screws in the bottom of the unit and place the
plastic caps on the bottom of the screws to prevent vibrations and
noise to the floor.
05
Break the metal strip on the short end of the casing ( to enable
continuous installation of the grille).
Only on the ends that need to be connected
1
57
EN
Publicité
Table des Matières
