Sharp 8M-B70AU Guide D'installation page 20

Connecting AC Cord
Connecting AC Cord
Do not turn on the power before completing connection.
IMPORTANT
• Connect the plug of the AC cord securely so that it is not dislocated.
• Do not disconnect the power plug or turn off the power supply suddenly while the product is in use. It may result in product
damage.
Connect the supplied AC cord to "AC INPUT" of the Monitor, and connect the plug into the power outlet.
Rear side of Monitor
Plug for TV main body
Power input terminal
Plug for outlet
• Place the Monitor in a location near
a power outlet and make sure the
power plug can be reached easily.
NOTE
• Turning off the power of the Monitor may take a while. (This time is required for storing the Monitor's internal information to the
memory.)
Power consumption
• There is small power consumption while the AC cord is connected even after power has been turned off by the
power button of the Monitor.
 Securing the connected cables and cord
• Pulling the cable connected to the Monitor forcefully by accident may damage the terminals. To reduce the load of
the terminals and prevent breakage, secure the cables using the cable tie.
1
Power
outlet
EN 5
1
Attach the supplied cable tie and
bundle the cables using it.
2
To loosen the cable tie, hold the lever
to release the lock and pull the cable
tie.