Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Wireless remote controller kit
• The signal receiving unit is mounted to the ceiling panel.
n Signal Receiving Unit
• The signal receiving unit is attached to the indoor unit.
• Hereinafter, all remote controller button names are indicated with respective symbols displayed
on the remote controller.
1
4
5
1
Emergency operation button
(See 13 page.)
2
Signal receiving unit
The signal sent from the remote controller
is received.
3
Display lamp
One of displays flashed while a trouble
occurs. When the display lamp flashes,
refer to "Before asking of repair" in 14 page.
4
lamp
This lamp goes on during operation.
• If "pi, pi" sound is heard, the MODE lamp of the display lamp goes on, and the
lamp flash alternately, the operation is not performed with the desired mode.
• Even if you push
,
other means, "pi" is heard 5 times and the button operation is not accepted.
3
5
6
CAUTION
or
when remote controller operation is disabled by the central control or
4
lamp
This lamp goes on while the timer is
reserved.
lamp
• In heating operation this lamp in the
following cases;
The operation has started.
The temp. controller has worked.
The unit is under defrost operation.
• This lamp flashes while a trouble occurs.
Owner's Manual
2
6
lamp and
English-4
Publicité
Chapitres
Table des Matières
