Part Names And Functions - Toshiba Carrier RBC-AX22CUL Manuel Du Propriétaire

Wireless remote controller kit
2

PART NAMES AND FUNCTIONS

n Remote Controller (WX-TA01UES)
• Up to 8 indoor units in a group can be
controlled by one remote controller
(See page 12)
• The displayed indication on the LCD is for
explanation.
Therefore it differs from the actual fact but it.
1
2
3
4
5
6
ACL
7
8
9
10
1
Transmitting part
2
ON/OFF button
Starts and stops the air conditioner
alternately.
3
Mode button
Selects an operation mode.
4
Fan speed button
5
Timer set button
Used for timer setting. (See page 8)
English-3
6
7
8
11
9
10
12
11
13
14
12
15
ADR 13
16
17
SENSOR
18
14
15
16
17
18
3
Filter button
No function
ACL button
Used after batteries are replaced or the slide
switch is switched. (See page 10)
Slide switch
(See page 10)
Battery compartment
(See page 10)
Cover
Slide the cover downward holding its both
sides.
Remote controller sensor
Senses the ambient temperature when
the remote controller is selected with the
sensor button.
LCD display
Displays the air conditioner operation
mode. (This illustration shows all display
contents.)
AUTO louver display differs
according to the installed unit.
(See page 9)
Setup temperature button
Adjusts the room temperature.
Set the desired set temperature by
pushing or .
Swing/air direction button
(See page 9)
Address button
(See page 12)
Ventilation button
Use this button when a ventilation fan or
other unit which was purchased on the
market has been connected.
Sensor button
Selects the temperature sensor of the
remote controller.
The temperature sensor of the indoor unit
is selected by default. While the indoor
unit temperature sensor is selected,
displayed on the display.
Owner's Manual
is