Bottom Side; Remote Control - DS Produkte VR301 Mode D'emploi

Bottom side

13
12
11
7 Side brush for cleaning
along edges
8 Sensor
9 Drive wheels (right and
left)

Remote control

25
10 Rechargeable battery
11 Nozzle and rubber strip
12 Front wheel
13 Charging contacts
To use the remote control, you must fi rst activate the
device via start/pause switch (6) on the device.
Start/Pause – Push the button in the middle to
start the device or to pause the device during the
vacuuming process.
Directional buttons – You can use the directional
buttons to steer the device manually.
Automatic charging – Push this button to tell the
device to return to the charging station to recharge.
Timer – Push this button to set the time for the de-
vice to vacuum each day (24-hour mode).
Vacuuming mode – You can use these buttons to set the
desired vacuuming mode. The vacuuming mode cannot be
changed during operation. You must pause the device if you
would like to switch the mode.
EN
7
8
9
8
10