Help In Case Of Malfunction; Correcting Appliance And Handling Faults - Iseki SRE2600X Notice D'utilisation

Help in case of malfunction

13 HELP IN CASE OF MALFUNCTION

13.1 Correcting appliance and handling faults

CAUTION!
Risk of injury
Sharp-edged and moving appliance parts can lead to injury.
■
Always wear protective gloves during maintenance, care and cleaning work.
Malfunction
The appliance does not
start.
The appliance gets stuck
and has dug itself in. The
wheels continue to turn.
The appliance mows at the
wrong time.
Motor stops during mow-
ing.
Mowing result is uneven.
456939_a
All manuals and user guides at all-guides.com
Cause
Rechargeable battery is flat.
Bump sensors do not trigger. Contact a service centre of the manu-
The grass is too high.
The appliance sits on an un-
evenness of the grass sur-
face.
The appliance has the incor-
rect time.
The mowing duration is in-
correctly set.
The appliance loses the time
settings.
Motor is overloaded.
Rechargeable battery is flat.
The cutting blades are blunt.
Mowing time is too short.
Mowing area is too large.
Cutting height level is too
low.
The cutting blades are blunt.
Remedy
Charge the appliance in the base sta-
tion.
facturer.
■
Increase the cutting height, then
lower in stages to the required
height.
■
Mow the grass short with a lawn
mower.
Eliminate the unevenness.
Set the time.
Set the mowing times.
Rechargeable battery is defective. Con-
tact a service centre of the manufac-
turer.
Switch off the appliance, set on level
ground or shorter grass and restart.
Charge the rechargeable battery.
Replace the cutting blade.
Program longer mowing times.
Reduce the mowing area.
Increase the cutting height, then lower
in stages to the required height.
■
Replace the cutting blade.
■
Attach the cutting blade with new
screws.
55