Trouble Shooting; Disposal - Siemens FDV241 Manuel De Mise En Service

All manuals and user guides at all-guides.com
13

Trouble shooting

Messages
Observe information
Exchange recommended
Exchange required
Error
14

Disposal

Building Technologies
Fire Safety & Security Products
When an error occurs which affects the proper function of the Video Fire
Controllers FDV241, a message is generated on the fire control panel. To remedy
the cause, additional information is available in the Video Fire Controller. This
information may be displayed for instance by the detector exchanger and tester
FDUD29x (for details see instruction manual for detector exchanger and tester,
doc. nos. 007227 and 009718).
Cause
–
–
–
The video functionality of the Video Fire Controller
is not available.
Invalid configuration.
There is a power supply error.
There is a software error (watchdog error).
There is a storage error.
There is a communication error between a detector
and the fire control panel.
All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is covered by
the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will help prevent
potential negative consequences for the environment and human health. It is a
precondition for reuse and recycling of used electrical and electronic equipment. For
more detailed information about disposal of your old appliance, please contact your
city office, waste disposal service or the shop where you purchased the product.
Trouble shooting
Measures
–
–
–
1. Check the video functionality.
2. Check the external power source.
Check the configuration.
1. Check the detector line voltage.
2. Exchange the device.
Exchange the device.
Exchange the device.
Eliminate the cause of the fault.
33
11.2008