Tool Specifications; Noise/Vibration Information - Würth BS 12-A MULTI Traduction Des Instructions De Service D'origine

OBJ_BUCH-3342-001.book Page 17 Thursday, December 14, 2017 9:18 AM
Cordless Drill/Driver
Art. No.
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for soft screwdriving
application according to
ISO 5393
Maximum torque, hard screwdriv-
ing application according to
ISO 5393
Maximum drilling diameter
(1st/2nd gear)
– Wood
– Steel
Max. screw dia.
Tool holder
Weight according to EPTA-
Procedure 01:2014
Permitted ambient temperature
– during charging
**
– during operation and during
storage
Recommended batteries
Recommended chargers
* Value dependent of the battery pack being used
** limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-1, EN 60745-2-2.
Typically the A-weighted sound pressure level of the product
is 79 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-1, EN 60745-2-2:
2
Drilling into metal: a <2.5 m/s
h
Screwdriving without impact: a
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.

Tool Specifications

BS 12-A BS12-SB 10
MULTI
5700 121
X
V= 12
-1
min 0 – 400
-1
min 0 – 1300
*
Nm 15
*
Nm 30
mm 19
mm 10
mm 7
6.35 (¼")
kg 0.8 – 1.1*
°C 0 ... +45
°C – 20 ... +50
AKKU-LI-
12V/X.X Ah
AL 30-LI
2
, K=1.5 m/s
2 2
<2.5 m/s , K=1.5 m/s
BS12-
BV 1/4''
5700 121 5700 121
001 002
– –
– –
– –
– –
– –
– –
– –
– –
1 – 10 6.35 (¼")
0.2 0.1
– –
– –
– –
– –
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools or
is poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
BS 12-WB BS12-
EV 1/4''
5700 121 5700 121
003 004
– –
– –
– –
– –
– –
– –
– –
– –
6.35 (¼") 6.35 (¼")
0.3 0.3
– –
– –
– –
– –
17