Product Description And Specifications; Product Features; Intended Use - Würth BS 12-A MULTI Traduction Des Instructions De Service D'origine

OBJ_BUCH-3342-001.book Page 16 Thursday, December 14, 2017 9:18 AM
 Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the power
tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight, fire,
water, and moisture. Danger of explosion.
 In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case of com-
plaints. The vapours can irritate the respiratory system.
 Use the battery only in conjunction with your
Würth power tool. This measure alone protects the
battery against dangerous overload.
 The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short circuit
can occur and the battery can burn, smoke, explode or
overheat.
 Use only original Würth accessories.

Product Description and Specifications

Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.

Intended Use

The power tool is intended for driving and loosening screws
and for drilling in wood, metal and plastic.
The power tool can be used with an angle screw adapter
(BS12-WB), off-set angle adapter (BS12-EV 1/4''), bit holder
adapter (BS12-BV 1/4'') or drill chuck adapter (BS12-SB
10).
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
For damage caused by usage other than intended, the user is
responsible.

Product Features

The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1 Mounting
2 Torque presetting ring
3 Gear selector
4 Battery unlocking button (2x)
5 Battery pack
6 Rotational direction switch
7 On/Off switch
8 Battery charge-control indicator
9 Worklight
10 Drill chuck adapter BS12-SB 10*
11 Bit holder adapter BS12-BV 1/4''*
12 Angle screw adapter BS12-WB*
13 Off-set angle adapter BS12-EV 1/4''*
14 Locking ring
15 Handle (insulated gripping surface)
16 Universal bit holder*
* The accessories illustrated or described are not
included as standard delivery.
16