Product Description And Specifications; Intended Use; Product Features; Technical Data - Würth BS 14,4-A EC Compact Traduction Des Instructions De Service D'origine

OBJ_BUCH-2978-001.book Page 15 Monday, October 10, 2016 2:00 PM
 Use the battery only in conjunction with your
Würth power tool. This measure alone protects the
battery against dangerous overload.
 The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short circuit
can occur and the battery can burn, smoke, explode or
overheat.
 The battery is supplied partially charged. To
ensure full battery capacity, completely
charge the battery in the battery charger
before using for the first time.
 Read the operating instructions of the battery
charger.
 Adjust the gear switch only when the machine
is at a complete stop.
 Always push the gear selector and turn the
operating mode selector switch through to the
stop. Otherwise, the machine can become damaged.
 Use only original Würth accessories.

Product Description and Specifications

Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Cordless Screwdriver

Art. No.
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for soft screwdriving application
according to ISO 5393
Maximum torque, hard screwdriving application
according to ISO 5393
*depending on the battery pack being used
** limited performance at temperatures <0 °C
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramics and plastic.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
For damage caused by usage other than intended, the user is
responsible.

Product Features

The numbering of the product features refers to the illustration
of the machine on the graphics page.
1 Tool holder
2 Keyless chuck
3 Torque presetting ring
4 Gear selector
5 Belt clip
6 Battery pack
7 Battery unlocking button
8 Worklight
9 Overload protector indicator
10 Universal bit holder*
11 Rotational direction switch
12 On/Off switch
13 Handle (insulated gripping surface)
* The accessories illustrated or described are not
included as standard delivery.

Technical Data

BS 14,4-A EC Compact
5700 407 X
V=
-1
min
-1
min 0 – 1900
Nm
Nm

Intended Use

BS 18-A EC Compact
5700 507 X
14.4
0 – 600
0 – 1900
*
28
*
56
18
0 – 600
*
31
*
60
15