ASSEMBLY STEP 4
HARDWARE FOR STEP 4
PART
TYPE
A
BOLT
B
SPRING WASHER
C
FLAT WASHER
(STEP E)
5
1
DESCRIPTION
QTY
M8X1.25PX15L
4
8.2X13.5X2.0T
4
8.2X15.0X1.2T
4
6
4
A B C
4
NOTE: Be careful not to pinch any wires
while assembling the console.
A
Open HARDWARE FOR STEP 4.
B
Gently place the CONSOLE (5) on top of the CONSOLE
MASTS (1&4). Attach the LEFT SIDE first using 2
BOLTS (A), 2 SPRING WASHERS (B) and 2 FLAT
WASHERS (C).
C
The CONSOLE CABLES (6) are tucked into the
CONSOLE MAST (4). Using the lead wire carefully pull
the CONSOLE CABLE (6) out of the CONSOLE MAST
(4). Detach and and discard the LEAD WIRE. Connect
the CONSOLE CABLES (6) and carefully tuck wires in
masts to avoid damage.
D
Attach the RIGHT SIDE of the CONSOLE (5) using
2 BOLTS (A), 2 SPRING WASHERS (B) and 2 FLAT
WASHERS (C).
E
Pull the top of the CONSOLE (5) towards the back of
the treadmill and HOLD while TIGHTENING THE LEFT
AND RIGHT SIDE BOLTS (A).
A
B
C
15