i-tec C31DUALKVMDOCKPD Mode D'emploi page 16

i-tec USB-C Dual DP Display Dock with PD 65W/100W
Check the "Set this monitor as main" box to select the additional monitor
as the main monitor.
Click and drag the second monitor to position it relative to the original
monitor on your laptop/tablet as needed.
Placement of one additional monitor
in relation to the original laptop/tablet monitor
Standby / Hibernate mode and Video port - after activating the laptop/
tablet from Standby / Hibernate mode, the primary (original) monitor
is displayed, so we recommend using the one integrated with the
laptop/tablet as the primary monitor to log back into the system.
Mirror mode - the additional monitor is governed by the parameters of the
original monitor in the system, i.e. if you set the Mirror mode and the orig-
inal monitor has a resolution of 1280x1024, then the screen is transferred
to the additional monitor at a maximum resolution of 1280x1024, even
if you set it to a higher resolution.
16 |
ENGLISH