Graco Deluxe Serie Manuel D'utilisation page 32

Step 2.
Recline the pushchair seat back to
lowest position.
Check that tray or arm
bar is securely attached
to pushchair.
40
Step 3.
Place carrier into pushchair so
notches in rockers fit over edge of
arm bar or tray. Push down so carrier
latches onto arm bar or tray. Pull up
on carrier to be sure it is securely
attached.
41
Step 4.
Grasp the strap attached to the seat
back and feed the free end of it
through the D-ring on the end of the
slack adjustment belt. Fold it back
onto itself and attach the
firmly.
42
®
VELCRO
32
Step 5.
To remove carrier from pushchair,
! Detach webbing from
®
VELCRO
slack adjustment belt D-ring.
! Pull up on the release handle
at back of carrier to release
attachment latch holding carrier to
tray or arm bar.
! Lift carrier out of pushchair.
WARNING: NEVER allow more than
one baby in the travel system at
one time.
WARNING: ALWAYS fasten the
harness of your car seat/ carrier
securely on your infant, regardless
of how it is being used.