Graco Deluxe Serie Manuel D'utilisation page 28

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

24
Step 3.
Pull lap section of belt through
openings on each side of base.
25
Step 4.
Slide strap under the centre lap belt
guide as shown.
Step 5.
Buckle the vehicle belt, press down
on base with your knee and pull
vehicle belt tight to secure base.
DO NOT allow vehicle belt
straps or car seat straps to
become twisted. Keep them flat.
CHECK the buckle contact point and
height.
26
Incorrect
27
Correct
If in doubt, contact either the car seat
manufacturer or the retailer.
28
Step 6.
Clip shoulder belt into the shoulder
belt clip to prevent vehicle belt from
loosening.
WARNING: DO NOT catch shoulder
belt between car seat and base.
You must make sure shoulder belt
is out of the way.
D
Belt opening
E
Shoulder belt clip
F
Centre belt guide
29
Step 7.
Push the car seat down until you hear
a "click". Pull up on the car seat to be
sure it is securely latched into the
base.
DO NOT use the base if the car
seat does not latch securely.
28

Publicité

Table des Matières
loading

Table des Matières