Adjusting The Handle - Graco Deluxe Serie Manuel D'utilisation

Adjusting the handle

1
Squeeze latches on both sides
at bottom of handle to release it.
2
Rotate handle into one of three
locking positions—carrying (up),
reclining (middle) or sitting (fully
down). Be sure it locks into desired
position and latches pop out.
Always place handle in the up
position when using the car seat in
a vehicle.
Always place handle in the down
position when removing your baby
from the seat.
Attaching the
car seat to the base
(on certain models)
NOTE: A base for your seat (which
stays buckled in the car, so you can
avoid fastening the vehicle belt each
time you go out) is sold separately
through certain retailers.
3
To attach seat to base, position front
of seat in base then push down on
the back until it locks into place.
(See Illustration).
Pull up on car seat to be sure it is
securely latched into base.
4
To remove, squeeze release handle
at back of the car seat to release the
attachment latch. Lift car seat from
base as shown.
23