Safety Requirements
European Safety Standards specify the
construction and performance of your car
seat as well as its components, requirements
for fitting and use, instructions and markings.
Your car seat has been approved to
European Standard
ECE R44.03
Semi-Universal/Universal group 0+, less than
13 kg. An approval number is attached to the
rear of the seat and must not be removed.
The seat is a "Universal" child restraint. It is
approved to Regulation No. 44.03 series of
amendments, for general use in vehicles
and it will fit all car seats.
Only suitable if the approved vehicles
are fitted with 3 point static/with retractor
safety belts, approved to UN/ECE
Regulation No. 16 or other equivalent
standards.
(Seat with Base)
The Base "Semi-Universal" child restraint. It
is approved to Regulation No. 44.03 series
of amendments, for general use in vehicles
and it will fit most, but not all, car seats.
See the fitting guide on page 88-89.
Only suitable if the approved vehicles
are fitted with 2 point static lap safety belt
or 3 point static/with retractor safety belts,
approved to UN/ECE Regulation No. 16 or
other equivalent standards.
19
NOTICE
(Seat Only)