Publicité
Les langues disponibles
Les langues disponibles
If the center second row seat belt is installed,
1
unlatch the seat belt and retract it to the ceiling
mount.
Open the cover to the cargo hook assembly.
3
Remove the bolt using a 10mm socket and then
remove the complete cargo hook assembly.
Repeat on opposite side. Store both cargo hook
assemblies in the supplied Zip-lock storage bag.
(J)
Place Bolt (D), Large Flat Washer (F), through hole
5
of bracket. Place Spacer (E) on the bolt that is
going through the bracket.
VERSION
DATE
01
04/16/19
RETAIN FOR
FUTURE USE
SUBARU OF AMERICA
INSTALLATION INSTRUCTIONS
Fold the second row of seats down to allow for
2
easier cargo area access during installation of the
cargo separator.
Remove the cover on the upper mounting
4
location with trim removal tool. Repeat for
opposite side. Store both trim covers in the
supplied Zip-lock storage bag (J) and then place
bag in glove box for future use.
Take the PAL Nut (I) and place it over the bolt
6
sticking through the bracket with the spacer.
Push evenly on 2 sides of the PAL Nut until it is
engaged with the Spacer. Repeat steps 5 and 6
for the 3 remaining holes in the brackets.
RETAIN COVER
FOR FUTURE
USE
PAGE
2/8
Publicité
