Cleaning And Maintenance - Russell Hobbs RHEP6 Manuel D'utilisation

result in the food spoiling. Cook food that can be left out such as rice, beans, grains or other
foods that will not spoil.
LED Error Indicator
When any of the following codes are displayed please see the possible problem or cause.
Indicator
Code
E1
E2
E3
E4

CLEANING AND MAINTENANCE


This appliance is for household use only and is not user-serviceable.

Do not open or change any parts by yourself. Please refer to a qualified electrical service
department or return to the supplier if servicing is necessary.

Always make sure the Pressure Cooker is unplugged, depressurized and completely
cooled down before dismantling.

Do not use bleach or other abrasive substances or solvents to clean your appliance as it
can be damaging to the finish.

Use a non-abrasive sponge or damp wash cloth to clean the exterior of the outer body
Problems/ Causes
Open circuit of the
sensor
Short circuit of the
sensor
Overheating
Signal switch
malfunction
Action
The sensor may be in poor contact with
the pot. First, try to adjust. If this does not
work, please visit your nearest Home Of
Living Brands approved service center.
The sensor may be in poor contact with
the pot. First, try to adjust. If this does not
work, please visit your nearest Home Of
Living Brands approved service center.
Place water into the pot as necessary or
as indicated by your recipe. Place the pot
into the housing, ensuring that it is fitted
properly and making sufficient contact with
the sensor. If this does not work, please
visit your nearest Home Of Living Brands
approved service center.
The sensor may be in poor contact with
the pot. First, try to adjust. If this does not
work, please visit your nearest Home Of
Living Brands approved service center.
18