Russell Hobbs RHEP6 Manuel D'utilisation page 13

 When the unit is not in cooking operation, the LED display will show 00:00.
2. Start:
 Once the power is on, select your preferred setting and press the "Start" button. It will
flash and start the heating process.
3. Reheat:
 Put the cooled food into the inner pot.
 Press the "Reheat" button, then press the "start" button. The unit will automatic work at
the reheating stage.
4. Cancel:
 If the cooker is busy with the heating process. You can choose to press the "Cancel"
button and the cooker will go into standby mode.
5. Hour and Min:
 One can use the "hour" and "min" button/s to set the preset time. The "min" button can be
used to set the pressure cooking time.
6. Menu:
 Press the "Menu" button and the word "High" will flash. Continuously press the button
until you reach your required menu. Press the "Start" button to confirm your selected
menu setting.
7. Delay Timer:
 Press the "DELAY TIMER" button first, and then press "hour" or "min" to set the amount of
time you would like to delay the cooking process by. Press "Start"/"Cancel" button to
activate the function.
8. Warm:
 Once the cooking is over, it will automatically go into a "keep warm" mode. An orange light
will be seen.
 Under the standby mode, by pressing the "Warm" button, it will go into the "keep warm"
mode as well.
13