Gentle Cool Air; Plasmacluster Operation - Sharp AH-XP18MV Mode D'emploi

GENTLE COOL AIR
The vertical airflow louvre is set obliquely
upward to deliver cool air to the ceiling in
order to avoid direct airflow.
1
During operation, press the
GENTLE COOL AIR button.
• The remote control will display "
TO CANCEL
Press the GENTLE COOL AIR button
again.
NOTE:
• If you want GENTLE COOL AIR operation in
SUPER JET mode, press GENTLE COOL AIR
button during SUPER JET operation.
AH-XP18MV_EN.indd 7
All manuals and user guides at all-guides.com
".
1
EN-7
PLASMACLUSTER OPERATION
Plasmacluster ions released into the room
will reduce some airborne mold.
1
During operation, press the
PLASMACLUSTER button.
• The remote control will display "
• The blue PLASMACLUSTER lamp (
will light up.
TO CANCEL
Press the PLASMACLUSTER button
again.
• The blue PLASMACLUSTER lamp (
will turn off.
NOTE:
• Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the next
time you turn on the unit.
• To perform Plasmacluster operation in FAN
only mode, press the PLASMACLUSTER but-
ton when the unit is not operating.
The mode symbol of the remote control will go
off and the fan speed cannot be set to AUTO.
".
)
)
1
11.5.23 11:21:15 AM