LG USNW096JRZ1 Manuel Du Propriétaire page 27

Using the Low Heating Function
This function operates the heating system to
maintain a minimum room temperature and
prevent objects in the room from freezing where
there is no permanent resident, such as a
vacation.
, are displayed on the display screen.
•
NOTE
• This function is available with Heating Mode.
• During LH operation, when you press buttons
such as , , MODE, FAN SPEED, and
then return to Heating Mode, 30 °C high
speed.
• If JET MODE button is pressed during LH
operation, this function is disabled and Power
Heating Mode is operated immediately. (only
for power heating model)
• In case an error occurred, operation can be
interrupted for the protection of the product.
• COMFORT AIR and
SWING
used while the LH function is in operation.
Using the Mosquito Away
Function
This function fans away mosquitos by
generating a high-frequency wave.
is displayed on the display screen.
•
NOTE
• You can use this function without turning the
air conditioner on.
• is displayed on some indoor units.
button cannot be
Using the Auto Clean Function
In the Cooling and Dehumidification Mode,
moisture is generated inside the indoor unit.
This function removes such moisture.
• is displayed on the display screen.
NOTE
• Some functions cannot be used while the Auto
Clean function is in operation.
• If you turn off the unit, the fan continues to run
for 30 minutes and cleans the inside of the
indoor unit.
Using the Comfort Sleep Function
This function operates the air conditioner
automatically to make the comfortable sleep
environment.
• , are displayed on the display screen.
NOTE
• This function is available with Cooling Mode.
• The vane stops swing and sets indirect airflow
angle, after 30 minutes from start even though
the room temperature doesn't decrease to
optimal temperature to sleep.
• It is possible that a comfortable sleep
environment is different according to the
people.
EN
27