Ce Declaration Of Conformity - Nice X-Bar Instructions Et Avertissements Pour L'installation Et L'utilisation

Table des Matières

Declaration of conformity to be used if the product is not installed in compliance with the criteria stated in chapter 1.3.1.

nd declaration of incorporation of "quasi machine"

Declaration in accordance with the Directives: 2006/95/CE (LVD); 2004/108/CE (EMC);

Note - The contents of this declaration correspond to declarations in the last revision of the official document deposited at the registered

offices of Nice Spa available before this manual was printed. The text herein has been re-edited for editorial purposes. A copy of the orig-

inal declaration can be requested from Nice S.p.a. (TV) I.

Declaration number: 341/X-BAR

Manufacturer's Name:

Address:

Person authorised to draw

up technical documentation:

Product type:

Model / Type:

Accessories:

The undersigned, Luigi Paro, in the role of Managing Director, declares under his sole responsibility, that the product speci-

fied above conforms to the provisions of the following directives:

• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 15th December 2004 regarding the

approximation of member state legislation related to electromagnetic compatibility, repealing directive 89/336/EEC,

according to the following harmonised standards:

EN 61000-6-2:2005, EN 61000-6-3:2007

The product also complies with the following directive in accordance with the requirements envisaged for "quasi machines"

• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machinery, and

amending directive 95/16/EC (recasting)

• It is hereby declared that the pertinent technical documentation has been compiled with appendix VII B of directive

2006/42/EC and that the following essential requirements have been observed: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-

1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11

• The manufacturer undertakes to transmit to national authorities, in response to a motivated request, all information per-

tinent to the "quasi machine", while maintaining the relative intellectual property rights.

• Should the machinery be put into service in a European country with an official language different from the one of this

declaration, the importer must attach the translation of this document to the declaration.

• Note that the "quasi machine" must not be put into service until the machine in which it is incorporated is duly declared

as compliant, if relevant, with the provisions of the directive 2006/42/EC.

The product also complies with the following standards:

EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008

EN 60335-2-103:2003

The product complies, within the constraints of applicable parts, with the following standards:

EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003

Oderzo, June 2010

APPENDIX II