Publicité
Les langues disponibles
Les langues disponibles
Display symbols
J
K
Setting the thermostat into operation
Actual temperature setting is shown in the display and the thermostat is ready for use.
Comfort mode
To jump between the two set points press the OK (
Night, Setback
temperature
OFF
All manuals and user guides at all-guides.com
J: Clock function
Wake
Night
K: Heating on
To change the temperature press UP (
DOWN (
) to increase or decrease the tempera-
ture. The display will fl ash for 5 seconds, and will
then show the new temperature setpoint.
) button
To change the temperature press UP (
DOWN (
) to increase or decrease the tempera-
ture. The display will fl ash for 5 seconds, and will
then show the new temperature setpoint.
To turn the thermostat OFF, press DOWN (
OFF appears in the display.
DO NOT USE THE TEST BUTTON ON THE GFCI
TO SWITCH OFF THE HEATING INSTALLATION.
The GFCI will automatically be reset after a dis-
connection of the mains supply
) or
) or
) until
3
Publicité
