First Flight - ACME CROSSWAVE Mode D'emploi

Controls
Please perform the following settings on the controller (Mode2 = Gas left):
Left stick > down
Right stick > center
(The images show a model example – the controls and directions are identical)
Controller (Mode 2)

First flight

Definitely check the section
Beginners!
Activate the D/R button after you have switched on the controller. Speed will be reduced and the turning rate
of the model will be lower!
Please note that the quadrocopter reacts oppositely if it is flying towards you. When moving the stick to the
left, the model flies to the right – when moving the stick to the right, the zoopa CrossWave FPV Racer flies to
the right!
Limit yourself on Position hold, forwards and backwards fly at the beginning.
All manuals and user guides at all-guides.com
Model
（
„9 steps before flight".
front）
The left stick (front / back) of the
controller controls the motor speed and
thus the ascent and descent of the
model. In the center, the model holds the
current altitude.
Yaw
The left stick (left or right) turns the
model around the vertical axis.
-Stick to the left
> Counterclockwise yaw
- Stick to the right
> Clockwise yaw
Roll / Nick
Through the right strick, the roll axis of
the quadrocopter is addressed. For a
forward / backward movement (pitch)
move the stick forward / back.
26
Action