auna Silver Star CD-DAB Mode D'emploi page 29

• It will have reminding sound after paired successfully. You now can play
music via BT;
• You can adjust volume from the radio or your phone.
AUX (Line input)
Aux in mode plays audio from an external source such as an MP3 player. To
play audio with Aux in mode:
1. Turn the volume low on both the Radio and if adjustable, the audio
source device.
2. Connect the external audio source to the AUX IN 3.5 mm stereo socket.
3. Press MODE until the display shows Aux In.
4. Adjust the volume of the Radio (and, if necessary, the audio source
device) as required.
USB
1. Press Mode until the display shows USB.
2. Plug the USB sticks into USB port and it will play first track automatically.
3. Use Previous  or Next button to switch to next track.
4. The display shows file name.
Note: The USB port does not support charging or data transfer with
computer.
CD
1. Press Mode until the display shows CD.
2. The display screen for the CD function will now show "Reading..."
followed by "No Disc".
3. Select the Open/Close CD function on the radio or the remote. Insert
your CD slightly and drive will take CD into the system to play.
4. The first song on the CD will now begin to play
CD Functions
• To skip between songs, use the '' or '' buttons on the radio or the
remote. Pause/Play using the button on the radio or remote.
• To skip rewind/forward through a song playing, hold down the ''
or '' buttons on remote control and release when you wish to stop
skipping.
• To eject the CD, press the Open/Close CD function on the radio or on
the remote, as per the guidance to enter the CD.
• Press and hold 'Enter' knob on main unit or 'OK' button on remote
control button to stop the album. This will also display how many songs
are on the album and total playing time. Press 'Play/Pause' to begin
listening again.
EN
29