auna Silver Star CD-DAB Mode D'emploi page 20

EN
20
NOTES ON ASSEMBLING
This DAB/CD player comes with four feet with built-in screws that fit into
the corresponding threaded sleeves on the bottom of the unit.
1. Screw the silicone pad to the end of the foot (the narrower side).
2. Place the speaker face down on a clean, flat, soft surface (such as a soft
blanket) with the base of the foot facing up.
3. Align the screw at the end of the feet with the threaded bases on the
underside of the table and carefully screw the feet into place. Be careful
not to screw the screws in crosswise. Make sure all four legs are screwed
firmly into the threaded bases, then place the table upright near an
electrical outlet to charge it.