auna Silver Star CD-DAB Mode D'emploi page 24

EN
24
DAB Mode- Auto tune
This function allows the radio to search automatically for DAB, Band III
channels.
1. In DAB mode, press the 'Scan' button to begin a local search for stations.
The display will change to 'Scanning...' A progress bar will show the
progress of the scan and the number of stations found during the scan
will also be displayed.
2. When the scan is finished, the radio will return to the station played
before the scan was initiated but any new stations found will have been
added.
DAB Mode- Full scan
This function allows the radio to search all DAB stations in local area.
1. In DAB mode, press and hold Info/Menu button and press the Previous
or Next buttons  . Until "Full scan" is displayed, press Enter button to
accept.
DAB Mode- Manual tune
This function allows a specific or new ensemble to be manually added to
the stations already available on the radio.
1. In DAB mode, press and hold Info/Menu button and press the Previous
or Next buttons   until "Manual tune" is displayed, press Enter
button to accept.
2. Use the Previous or Next buttons   until the desired frequency
shown in the display and then press the Enter button, the frequency
and name of the ensemble and the signal strength will be displayed
in displayed.Press the Enter button again to add the ensemble and
automatically tune to the station.
DAB Mode- Prune
This function allows unavailable stations to be removed from the station
list. Press and hold Info/Menu button into tuning menu.
1. Press the Previous or Next buttons / until "Prune" is displayed and
press the Enter button to confirm.
2. Rotate the knob to select (yes) to confirm and delete. If (No) is select the
operation will be cancelled.