i-tec C31TRIPLEDOCKPDPRO Mode D'emploi page 17

Notes on using the docking station with monitors:
Working on a connected monitor while the Mac monitor is tilted is possible
with mains power (there is a partial limitation when using an HDMI monitor
on older versions of Mac). When battery power is applied, use of the HDMI
monitor is limited by the Mac (in some cases, the procedure in the following
section can be used for display problems).
Most of the problems with screen refresh on a connected monitor after
putting the Mac to sleep, after using the screensaver, after restarting the Mac,
after turning the Mac off/on can be solved by disconnecting the USB-C cable
of the dock from the USB-C port of the Mac and reconnecting it after about 10
seconds.
B: After connecting other USB devices to the USB 3.0 port of the docking
station (USB external HDD, USB keyboard, USB mouse, USB HUB, USB
graphics adapter), these devices are used in the standard way. If the device
does not charge or does not work, then connect the original USB-C power
adapter to the USB-C port of the docking station to support power.
Most of the problems with the dock and connected peripherals can be solved
by disconnecting the dock's USB-C cable from the USB-C port of the PC/Mac/
smartphone/tablet and reconnecting it after about 10s.
CHARGE
The docking station supports charging of connected USB mobile devices
such as smartphones, e-book readers, media players, navigation devices and
tablets. Simply connect the device to be charged with the original cable to the
USB port of the docking station. If the device does not charge, then connect
the original USB-C power adapter to the USB-C Power Delivery port of the
docking station to support charging.
AUDIO
The audio output device for listening via HDMI needs to be set/verified here:
System Preferences-Sound-Output - Set HDMI Audio Device.
The audio output devices for both headphones and monitor can be selected
in Open-Applications-Utilities-Audio MIDI.app - click on "+" at the bottom left
- Create Multi Output Device and select the desired outputs from the options
on Multi Output Device.
Most of the problems with the dock and connected peripherals can be solved
by disconnecting the USB-C cable of the dock from the USB-C port of the PC/
Mac/smartphone/tablet and reconnecting it after about 10s.
If you have any problems with the USB-C docking station, you can contact our
technical support: support@itecproduct.com.
Quick Start
ENGLISH | 17