Control Panel; Temperature Setting And Controls - Bonnet Neve SHAPE HOT TABLE Instructions Pour L'utilisateur

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
Functions
IT
The device is designed to offer two operating
options:
FR
• HUMIDIFIED version with water filling
• HOT AIR function
EN EN
Both versions have a heated ceiling light.
DE
To activate the "HOT AIR" function, take switch
ES
(3) to ON. A forced flow (by fans) of hot air is
circulated on the display deck.
PT
To activate the "STEAM" function, with the (3)
switch in ON position, take the (5) switch to ON.
The appliance starts to produce steam which is
circulated by the flow of hot air.
An internal function will allow the production of
steam only after 35 minutes have passed from
switching on the HOT AIR function even if the
STEAM button is pressed.
F
The "STEAM" function can only be
activated with the "HOT AIR" function
on.
To activate the "CEILING HEATING LAMP" take
switch (2) to ON.
N°DOC. UM000311 REV. "C" - 18/01/22
SHAPE HOT TABLE
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023

Control panel

1
2
1. Button to increase temperature
2. Button to decrease temperature
3. Function button
4. SET key

TEMPERATURE SETTING AND CONTROLS

Press and instantly release (4) key
SET appears on the display.
Press (4) key again and the SETPOINT value
appears on the display.
To change the value, press the keys (1) (to
increase) or (2) (to lower) within 15 seconds to
choose the new value.
F To modify parameters that modify the
operation of the display cabinet, contact
the installer or a specialist technician.
16/26
3
4
Fig. 36