Carton Inventory; Hardware Inventory - Chamberlain LiftMaster PROFESSIONAL ATS 211X 1/2 HP Mode D'emploi

Carton Inventory

Your garage door opener is packaged in two cartons
which contain the motor unit and all parts illustrated
below. Accessories will depend on the model
Mounting Hardware
(Rail Support Bracket)
"C" Wrap (2)
Safety Reversing Sensor
Mounting Bracket
With Square Holes (2)
Straight
Door Arm
Chain
Pulley Bracket

HARDWARE INVENTORY

Assembly Hardware
Washered Screw, 5/16"-18x1/2"
(2) (Mounted in Opener)
Hex Screw 1/4"-20x5/8" (2)
Lock Washer 1/4"-20x5/8" (2)
Screw #8-32x3/8" (1)
Washered Screw
5/16"-18x1/2" (2)
Rail Support
Bracket
2 -Conductor Bell Wire
White & White/Red
Door Bracket
Safety Reversing Sensor
Mounting Bracket
With Slot (2)
Trolley
Safety Labels
and Literature
Installation Hardware
Hex Screw 5/16"-18x7/8" (4)
Nut 5/16"-18 (4)
Lock Washer 5/16" (4)
Rail Grease
Lag Screw 5/16"-9x1-5/8" (4)
Screw 6ABx1-1/2" (2)
Handle
Ring Fastener (3)
Self-Threading Screw
1/4"-14x5/8" (2)
Insulated Staples (10)
Drywall Anchors (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1" (2)
Rope
purchased. If anything is missing, carefully check the
packing material. Parts may be stuck in the foam.
Hardware for installation is also listed below.
Lighted Door
Control Button
Curved Door Arm
Door Bracket Plate
Rail
The Protector System ®
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
Hardware for Safety
Reversing Sensor
Lag Screw 1/4x1-1/2" (4)
Carriage Bolt 1/4"-20x1/2" (4)
Lock Nut 1/4"-20 (4)
Wing Nut (2)
Hex Screw 1/4-20x1-1/2" (2)
Screw #10-32x3/8" (4)
Lock Nut #10x32 (4)
Insulated Staples (20)
5
Header Bracket with
Clevis Pin and Fastener
Styrofoam
Chain
Motor Unit