Carton Inventory; Installation Hardware - Chamberlain LiftMaster Professional SECURITY+ 3110C 1/3 HP Manuel Du Propriétaire

Carton Inventory

Your garage door opener is packaged in two cartons
which contain the motor unit and all parts illustrated
below. Accessories will depend on the model
Model 3220C
Multi-Function
Door Control Panel
Motor Unit with a Light Lens
Sprocket Coupling
Safety Sensor
Bracket (2)
RAIL ASSEMBLY
Coupling Sleeve (1)
Hex Bolt 1/4"-20 x 5/8" (4)
Nut 1/4" - 20 (4)

INSTALLATION HARDWARE

Hex Bolt 5/16"-18x7/8" (4)
Lag Screw 5/16"-9x1-5/8" (2)
Lag Screw 5/16"-18x1-7/8" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Model 3110C
Model 3220C (1)
SECURITY✚
3-Button Remote Control
Lighted
Door Control Button
2 Conductor Bell Wire
White & White/Red
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
purchased. If anything is missing, carefully check the
packing material. Parts may be stuck in the foam.
Hardware for installation is also listed below.
Model 3110C (1)
®
SECURITY✚
®
1-Button Remote Control
Header Bracket
Rail
Rail Brackets
Trolley
Door Bracket
Safety Labels
Literature
Nut 5/16"-18 (4)
Lock Washer 5/16" (4)
Screw 6ABx1-1/4" (2)
Screw 6-32x1" (2)
Self-Threading Screw 1/4"-14x5/8" (2)
Insulated Staples (30)
Ring Fastener (3)
Drywall Anchors (2)
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
Rope
Handle
5
Remote Control
Transmitter Visor Clip
Curved Door
Arm Section
and
Straight Door
Arm Section