MANUAL - STREET-SOUND
become impossible to recharge the battery!
4. If you don't use the unit for a longer period of time, it is recommended to charge it at 40% of its capacity
and check/charge it once per month.
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
We cannot be held responsible for damaged batteries further to the non-observance of these basic rules.
CHARGING THE BATTERY
Prior to using the unit for the first time, fully charge the built-in battery. Plug the DC connector of the supplied
mains adaptor into the input socket (6) on top of the unit and the other end into a mains outlet.
The charging LED (14) lights up in red during charge and goes off when the battery is fully charged.
CONTROL PANEL
1
1. MIC input
2. Mic volume control
3. Echo volume control
4. LED Display
5. Micro-SD input
6. DC5V input: Charge the built-in battery via the supplied mains adaptor
7. AUX input
8. POWER knob: Turn the volume button clockwise to power on the speaker and increase the volume. It will be
in Play mode. Turn the volume to the desired level. Turn the knob counterclockwise to lower the volume
and power the speaker off.
9. MODE: Press to select among USB input, FM mode or Bluetooth mode. Keep the button pressed to switch the
LED illumination on or off.
10. Press shortly to go to the previous song when in USB, TF or Bluetooth mode. In FM mode, it switches to the
previous channel. Keep pressed to start recording.
11. Press shortly to PAUSE/PLAY in USB or TF mode. In FM mode press shortly to scan the channels.
12. Press shortly to go to the next song when in USB, TF or Bluetooth mode. In FM mode, it switches to the
next channel.
TWS pairing: In Bluetooth mode, keep pressed to connect with another device
13. USB card slot
14. CHARGING LED: The LED is red during charge. When the battery is fully charged, it turns off.
13
7
3
2
5
Product Code: 10-5547
10 11 12
14
4 9
6
2A
8
3