Table des Matières
Publicité
Accessories and tools
Required accessories
• 1x ROXXY EVO LiPo 3 - 2600M 40C with BID-Chip
• 1x ROXXY EVO LiPo 3 - 3200M 30C with BID-Chip
• 1x Lentus power set incl. folding propeller 11" x 7"
• 1x RX-7 light receiver
• 1x Servo set Lentus with M6 / UNI cable set
EN
• 1x Multiplex Zacki2 ELAPOR 20g (Blister)
• 1x Multiplex Zacki ELAPOR super liquid 10g VE1
Required tool
• Blade knife
• Side cutter
• Screwdriver (for M3)
• Socket wrench SW 13
• Hot glue
Specifications
Wingspan:
Overall length:
All-up weight:
Total surface area:
Total surface area
loading:
Control channels:
RC functions:
Flight time:
Contents
KIT # 1-00899
• Moulded ELAPOR
®
parts for fuselage, wing, tail panels and cabin
frame, canopy glass
• all plastic parts, small items and linkage components required to
assemble the model
• spinner
• propeller driver
• taper collet
• die-cut decal sheet
• comprehensive instructions
18
3000 mm
1410 mm
approx. 2300 - 2600 g
approx. 52,6 dm²
approx. 44 - 49 g/dm²
7 optional 9
Elevator, rudder, ailerons, flaps, throttle, optio-
nal retractable landing gear, tow coupling
up to about 30 min. without thermal assistance
Optional accessories
# 316656
• 1x Retractable undercarriage Lentus
(Kit with Ø70mm wheel)
# 1-00482
• 1x Servo HS-85MG
# 1-01183
• 1x ROXXY EVO LiPo 4-2600M 40C
# 55810
(ground take-off with 8 x 6" Prop.)
# 1-01288
• 1x 2 folding propeller blades 8" x 6"
# 1-01291
(ground take-off with 4S)
# 852728
• 1x COCKPIT SX 9 transmitter
• 1x RX-9 M-LINK 2.4 GHz receiver, telemetry-capable
• 1x Receiver, WINGSTABI RX-9-DR M-LINK
• 6x HS-65HB Carbonite servo
• 1x Lentus M6 / UNI cable set (complete)
• 1x ALUMINIUM spinner, 54 mm Ø with 5 mm Ø taper
collet, FunRay Tuning
• 1x Model bag sailors up to 3,2m (e.g. Lentus/Antaris)
• 1x ROXXY Smart Control 70 MSB speed controller
• 1x HITEC Multicharger X1 RED
• 1x MPX M6 charge lead
• 1x Vario / altimeter sensor
• 1x TEK-Vario u.TAS (TrueAirspeed) sensor
• 1x GPS sensor for M-Link receiver
• 1x Flight Recorder
• 1x Glider fuselage nose (for glider version)
• 1x Tow-release (for glider version)
• 1x Velcro strap small, for 2-4S LiPo (3 pieces)
RR # 1-00900
• Factory-assembled ELAPOR
• including ROXXY C35-48-990kv motor
• ROXXY BL-Control 755 S-BEC speed controller
• 11 x 7" folding propeller
• 6 x HS-65HB Carbonite servos
• factory-installed M6 quick-release cable set
• decals applied
• comprehensive instructions
# 1-01759
# 112086
# 1-01025
# 1-01970
# 45161
# 55812
# 55013
# 112065
# 1-01286
# 1-00481
# 1-01634
# 318579
# 114131
# 92516
# 85416
# 1-00667
# 85417
# 85420
# 224350
# 723470
# 1-00871
®
model
Publicité
Table des Matières
