Zero / Tare Function - Etekcity EK9000 Serie Mode D'emploi

EN

Zero / Tare Function

When you measure items inside a container, you can use
the Tare function to remove the container's weight from the
final measurement.
Press
1.
". If the screen does not display "
to auto-adjust to zero.
TARE
Place the container on the center of the scale.
2.
Wait for the reading on the display to stabilize. The display will
3.
show the container's weight.
Press
4.
should now display "
Place the liquid or items into the container. The scale will
5.
measure the contents without including the weight of the
container. [
When you're done, reset the scale by removing all weight and
6.
pressing
NIT
to turn on the scale. Make sure the display reads "
TARE
to tare the weight of the container. The screen
TARE
Figure 2.1
again.
TARE
NIT
T
".
]
T
Figure 2.1
15
" automatically, press