Troubleshooting - Etekcity EK9000 Serie Mode D'emploi

EN

Troubleshooting

Problem
Scale does not
turn on.
Reading is
inaccurate.
Possible Solution
Open the battery compartment and remove the
plastic strip.
Replace the batteries (see page 17).
Make sure the batteries are inserted under the correct
polarity as marked in the battery compartment.
Place the scale on a hard, dry, flat surface, and keep the
scale away from dirt, dust, vibrations, wind, air currents,
and electromagnetic interference.
Make sure the screen displays "
Zero / Tare Function
measuring (see
Remove the batteries for 45 seconds, then replace
them to reset the scale.
18
" before
, page 15).