Technical Data; Ordering Replacement Parts; Disposal And Recycling; Before Starting The Equipment - EINHELL TC-TW 100 Instructions D'origine

Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Dimensions .............approx. 616 x 658 x 330 mm
Net weight: ................................. approx. 17.8 kg
Max. load capacity: .....................................75 kg
Load capacity of the support area per drawer, see
Fig. 6.
5. Assembly
Important! To avoid malfunctions, please note
that all the drawers must be COMPLETELY
closed before you pull one out!
5.1 Fitting the handle
Fit the handle (3) with the screws (a) as shown in
Fig. 2.
5.2 Fitting the wheels
Fit the wheels (2) as shown in Fig. 3.

6. Before starting the equipment

Unlock the drawers by pushing down the locking
switch (4) located in the bottom drawer. (Fig. 4-5)
7. Cleaning and ordering spare
parts
7.1 Cleaning
Clean the tool trolley with a slightly damp cloth
and if necessary a small amount of conventional
paint cleaner. To avoid damaging the surfaces do
not use solvents or other aggressive or scouring
cleaning products.
Anl_TC_TW_100_SPK9.indb 9 Anl_TC_TW_100_SPK9.indb 9
GB

7.2 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes.
- 9 -
02.04.2019 11:55:01 02.04.2019 11:55:01