Intended Use; Technical Data; Before Starting The Equipment - EINHELL GE-CS 18 Li Traduction Du Mode D'emploi D'origine

Explore battery + charger options at
einhellUSA.com

3. Intended use

The chain sharpener is designed for sharpening
saw chains.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
The machine is allowed to be used only for its
intended purpose! Even when the equipment
is used as prescribed it is still impossible to
eliminate certain residual risk factors. The
following hazards may arise in connection with
the machine's construction and layout:
•
Contact with the grinding wheel where it is not
covered.
•
Catapulting of parts from out of damaged
grinding wheels.
•
Catapulting of workpieces and parts of
workpieces.
•
Damage to hearing if essential ear-muffs are
not used.

4. Technical data

Motor power supply: ............................18 V
Idle speed n : ........................... 6,500 min
0
Adjustment angle: ............35° to the left and right
Grinding wheel Ø (inside): ...........⅞ in. (22.3 mm)
Grinding wheel Ø (outside): max. 4¼ in. (108 mm)
Grinding wheel thickness: .............⅛ in. (3.2 mm)
Weight: ......................................... 3.7 lbs (1.7 kg)
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Anl_GE_CS_18_Li_USA_SPK7.indb 13 Anl_GE_CS_18_Li_USA_SPK7.indb 13
EN
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment's construction and
layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is applied.

5. Before starting the equipment

Warning!
Always remove the battery pack before making
adjustments to the equipment.
5.1 Assembly (Fig. 3-6)
•
Place the chain clamping mechanism in the
chuck (Fig. 3) and screw from underneath
using the star screw (Fig. 4)
•
Before starting the chain sharpener, fasten
it securely to a suitable surface (e.g. a
workbench) at a suitable place (protected
against dust, dry, well-lit) using M8 fixing
screws and washers (Fig. 5).
•
Make sure when doing so that the mounting
(rpm)
-1
plate of the chain sharpener is pushed onto
the surface as far as it will go (Fig. 6).
- 13 -
18.04.2019 14:26:48 18.04.2019 14:26:48