Einbauanl_CD5_0.book Seite 35 Montag, 1. Juli 2002 2:38 14
•
Engage the reverse gear for the reverse signal function test.
The arrows under
engaging the reverse gear.
•
When using the GPS for the first time, the vehicle must be parked
outdoors, while ensuring that it has a clear view in all directions
(not in the immediate vicinity of buildings).
Information on the GPS reception is given in the right-hand part of
the display.
Four different messages may appear:
-
GPS OK
: GPS reception is already available.
-
GPS WAIT
: It is necessary to wait for GPS reception. You must
wait until
GPS OK
-
GPS ANTENNA ERROR
nected.
-
GPS MODUL ERROR
the hotline.
You must wait until
(or a higher value) is displayed.
This procedure (first reception of the necessary GPS data)
may take a few minutes. The unit must remain switched on
for the entire duration of this procedure. The vehicle must
not be moved. If after 5 minutes there has been no change
in the values, the parked position (clear view in all direc-
tions as far as possible) or the installation location of the
Subject to correction and technical modifications
must change direction on
Direction
is displayed.
: The GPS antenna is not properly con-
: If this message is displayed, please contact
,
(or
) and
GPS OK
F: 2
F: 3
35
Installation guide
Speed
Direction
0 0 0
Speed
Direction
0 1 2
Speed
Direction
0 1 2
Speed
Direction
0 1 2
Speed
Direction
0 1 2
ALM: 22
Copyright by Becker GmbH, D-76303 Karlsbad
GPS WAIT
F: 1
S: 1
ALM: 2
GPS OK
F: 3
S: 6
ALM: 22
GPS WAIT
F: 1
S: 1
ALM: 2
GPS
ANTENNA
ERROR
GPS
MODUL
ERROR