Surround Sound Decoding; Digital Input (Digital Optical); Analog Input (Rca); Updates And Rebooting - Paradigm soundplay Manuel Du Propriétaire

SURROUND SOUND DECODING

DIGITAL INPUT (Digital Optical)

This soundbar is capable of detecting and auto-
matically decoding multi-channel audio formats,
such as those found on DVD and Blu-ray movies.
When utilizing a digital connection, the soundbar
can process the following formats: Dolby
DTS Digital Surround

UPDATES AND REBOOTING

REBOOTING YOUR SOUNDBAR

To completely reboot your soundbar, disconnect
the power cord, wait 30 seconds, and plug it
back in. Press the power button to turn the
soundbar on. This reboot will cycle the power
off and on.
27
Paradigm Soundplay Manual 101816.indd 27
Digital,
®
, and digital stereo.
™

ANALOG INPUT (RCA)

Digitally encoded sound information cannot be
transmitted to an analog input. This connection
method is adequate for most devices that only
offer two channels of output (such as VCRs, CD
players, older game consoles, or portable media
player docks). Although most surround sound
capable devices, such as DVD and Blu-ray play-
ers, offer both analog and digital connections, the
digital connection should always be employed. If
a source device is connected via an analog left/
right RCA connection, the 5.1-channel encoded
audio content will not be sent to the soundbar.

SOUNDBAR FIRMWARE UPDATE

Your soundbar Microcontroller (MCU) may
occasionally require firmware updates. Please
check www.paradigm.com for the latest firmware
updates.
2016-10-18 12:19 PM